SYVECS AWD / 4WD CONTROLLER – LAMBORGHINI HURACAN / AUDI R8 4S GEN2

The new Huracan / R8 Gen2 Syvecs AWD Module is a standalone AWD/4WD/center differential controller designed to control any AWD/4WD solenoid/motor up to a maximum of 30 amps via pin sharing logic.

OEM controllers are fixed and not adjustable, but by installing a Syvecs AWD controller, users can optimize control and provide the best stability, acceleration performance, and custom control.

Our Scal software allows users to connect to the device and set over 40 maps to customize the control of the solenoids/motors used in the AWD systems.

Large slip, high current, high temperature limp protection options that warn the driver but keep the AWD active unlike the OEM controllers which shut off the outputs which is not ideal at high horsepower!

Works with any engine management system

The Drive Mode button on the Huracan / R8 is used to toggle the map so the user is able to toggle between Awd Select 1, 2, 3 meaning all of the following maps can be customized. You can also enable burnout mode to be active when there are dangers or when the handbrake is present.

Syvecs also offers an optional wiring harness that allows the fitting of external burnout switches, as well as live potentiometers that allow the driver to set AWD mode on the fly or switch to 2WD mode with the push of a button.

• Maximum 30 amps via pin sharing (HBR1&2 or HBR3&4)
• Onboard power monitoring for each output
• 2 x CanBus - Configurable transmission via scaling program
• 4 x analog inputs for assigning burnout switch, adjustment potentiometer, pressure sensor and temperature sensor.
• USB port - Dedicated Scal software with full calibration control
• VCDS support - communication with OEM tools and replication of OEM Haldex ECUs
• Mains power control circuitry based on the ignition switch
• Protection against reverse polarity
• Weatherproof housing
• 125c temperature resistant
• 6v to 25v capable