BorgWarner AirWerks S400SX-E Turbo - 88mm 110/96 - 14009097008 aka S488SX-E

-

Original BorgWarner AirWerks turbocharger

The BorgWarner S488SX-E turbochargers are a symbiosis of the attractively priced AirWerks turbochargers and the high technology of the EFR turbos. The most important key feature of the EFR series is the forged and milled compressor wheel in a special design with the perfectly matched high-flow intake ducts. This was adopted in the AirWerks turbochargers to create a perfect response and an optimal build-up of boost pressure as with the EFR chargers. However, the basics of the AirWerks series are retained, so that the charger still has a cast exhaust housing and a robust (overhaulable) plain bearing. The preparation for the speed sensor was also taken over in order to achieve the optimum efficiency of the charger.

All SX-E turbochargers come with a mounting kit and are prepared for a compressed air connection in the compressor housing.

SX-E Highlights:
- good response behavior thanks to the latest compressor wheel geometry (EFR technology)
- High Flow / Anti Surge intake (EFR technology)
- Robust, repairable plain bearing
- Preparation for speed sensor
- Preparation for pressure connection
- Including mounting kit

Performance range: 750-1575hp
compressor housing: Intake 140mm / Pressure 89mm (or V-Band)
compressor wheel: Entry 87.93mm / exit 110mm
exhaust housing: Fit exhaust housing from S400SX (with 96mm turbine wheel)
turbine wheel: Outlet diameter 88.05mm / inlet diameter 95.70mm

The exhaust housing and mounting kit must be purchased separately.