🚚 Delivery time is about 1-2 weeks.
Nuke Performance FPR100s Fuel Pressure Regulator: Redefining efficiency for motorsport fuel management.
Lightweight design, ethanol proof fuel pressure regulator with sleek design and easy to install stainless steel brackets. Each device is thoroughly tested before delivery, with unmatched functionality and the same high quality as always.
- Lightweight motorsport fuel pressure regulator
- Safe for all types of fuel including methanol and ethanol
- Each device is performance tested before delivery
- Fully adjustable up to 100 PSI (7 bar)
- 1:1 boost pressure reference
- Stainless steel mounting bracket
- AN-6 ORB inlets/outlets
The most reliable 1:1 boost reference solution to assemble simple or complex fuel systems for all types of tuning or motorsport engine setups. Redesigned with a focus on precision functionality. Lightweight design with the same hallmarks as the entire Nuke Performance range of motorsport parts, with an integrated stainless steel bracket for secure and easy assembly for all applications and installations.
- Fully adjustable between 30 PSI and 100 PSI (2-7 BAR)
- AN-6 ORB inlet and outlet, approved for 200-700 hp
This is the ultimate AN6 fuel pressure regulator with the highest flow capacity for systems between 200 and 700 hp. Prepared for AN-6 ORB connectors, supplied with an AN-6 ORB connector for one inlet. The FPR100s is a product that has evolved from our life on the track and takes its place right next to its big brothers FPR100m and FPR100x.
1:1 boost pressure reference and high-flow design with minimal flow loss
Fuel pressure increases at a 1:1 ratio when boost pressure is referenced with the precision pressure setting. Fuel pressure is adjusted via the top adjustment screw with its hardened steel ball, allowing for an exact and well-timed fuel pressure setting, ≈0.14 BAR (≈2 PSI)/rev. The dual-intake design allows for a choice of left or right-hand intake, or dual intake for a V-engine configuration. The 1/8" NPT thread is forward for easy installation of fuel pressure gauges and fuel pressure sensors.
- 1:1 boost pressure reference
- 600 LPH free flow rate
- AN-6 ORB inlet and outlet
- Lightweight motorsport design
With the AN-6 ORB dual intake, you can choose between a left or right intake, or dual intake for a V-engine configuration. And with the easy-to-access 1/8" NPT thread on the front, you can easily connect your fuel pressure gauge or sensor for easy pressure readings.
Choose between an AN-6, AN-8 and AN-10 fuel pressure regulator to meet all your fuel delivery needs.
The new FPR100 series fuel pressure regulators are available in AN-6, AN-8 and AN-10 sizes and have been specifically designed to meet the demands of motorsport. All three have an extremely slim and light design with the latest technology and functionality.
- FPR100s AN-6: 200 - 700 horsepower
- FPR100m AN-8: 500 - 1200 hp
- FPR100x AN-10: 700 - 2000+ horsepower
A choice of three different sizes of FPR100 fuel pressure regulators allows you to choose the optimal function for your setup. In combination with the different connections for intake and exhaust ports between the AN-6 and AN-12, these FPRs offer a power range from 200 to 2400 hp.
The FPR100s has AN-6 ORB inlet and AN-6 ORB outlet ports and is designed for setups between 200 and 700 hp. This makes it the lightest and most space-saving controller in Nuke Performance's FPR100 series.
Easy to install with a stainless steel bracket, and safe for all types of fuel including alcohol fuels like ethanol
All FPR100 series fuel pressure regulators are supplied with a strong stainless steel bracket which makes them extremely easy to fit in any engine compartment and which secures the FPR even under extreme conditions to prevent malfunction. And like all Nuke Performance motorsport products, the FPR100s fuel pressure regulator is engineered, engineered and manufactured to handle all fuels including gasoline, ethanol and methanol with its stainless steel hardware and anodized internals.
- Safe for all types of fuel including ethanol
- Fiber reinforced 46mm nitrile cone
The FPR1002's 46mm fiber reinforced nitrile diaphragm is of the highest quality possible and is approved for use on all fuel types including petrol and alcohol fuels such as ethanol, E85, E100 and methanol.
Select the correct fittings for your FPR100s fuel pressure regulator
A 5mm vacuum fitting is included, while 6mm Pneufit quick connectors are available as accessories. The FPR100s uses AN-6 ORB threads to accommodate the most common connectors. It comes with an AN-6 ORB connector that can be easily removed for dual inlet applications. It fits most popular AN-6 connectors, with connectors sold separately.
Every FPR100s controller is thoroughly tested before delivery.
In order to maximize the quality and functionality of the FPR100 series including FPR100s AN-6, FPR100m AN-8 and FPR100x AN-10, every single fuel pressure regulator is tested before delivery. Our test facility has world-leading test equipment that can detect even the smallest features that could affect function. There is no manufacturing shortcut that leads to the outstanding performance and functionality of the Nuke Performance FPR100s Fuel Pressure Regulator.
Developed according to the high demands of global motorsport
Engineered in Sweden, the FPR100s AN-6 fuel pressure regulator has been designed and engineered in collaboration with global motorsport teams. The Nuke Performance Fuel Pressure Regulators have never stopped evolving. Always ready to offer you maximum functionality and with extremely high quality, they perform even under extreme and demanding conditions. The FPR100 Series Fuel Pressure Regulators are manufactured with the same quality standards as every other part in the lightweight Nuke Performance motorsport range.
