RADIUMAUTO Fuel Rail Top Feed Conversion Kit for Mazda 13B Primary

-

CONNECTIONS AND FITTINGS

The fuel line has three connectors designed for 8AN ORB.

8AN ORB adapter fittings.
8AN ORB direct mount controller.
8AN ORB fuel impulse dampener.
Adapter for fuel pressure gauges.

Appropriate fittings must be selected for the specific application. Adequate clearance around the fuel line connector(s) is required for larger accessories such as fuel pressure regulators, fuel pressure gauges and fuel impulse dampeners. To check the clearance, the dimensional drawings on the product pages can be used as a guide.

The Radium Engineering High Flow Primary Fuel Rail is for the 13B-RE and 13B-REW rotary engines used in the 1990 thru 1995 Mazda/Eunos Cosmo and 1992 thru 2002 Mazda RX7 FD3S. The aluminum fuel line is black anodized and is compatible with all common fuel types including E85. Manufactured with a large internal bore, the fuel rail can support all necessary engine power requirements.

The additional center port allows for additional fuel system accessories such as: B. the OEM fuel temperature sensor (with 14-0421), a pressure transducer, a radium fuel impulse dampener (see below), etc.

Heat insulating spacers and washers are included to prevent heat energy from being conducted into the fuel.

The included 14mm lower injector seats (pictured above) have been specifically designed to be compatible with or without the OEM diffusers. They feature FKM O-rings making them suitable for heavy-duty applications.

INJECTOR COMPATIBILITY :
Below are some of the many injectors that are directly compatible with this fuel rail:

Injector Dynamics ID1050-XDS-34-14-14
Injector Dynamics ID1300-XDS-34-14-14
Injector Dynamics ID1700-XDS-34-14-14
Injector Dynamics ID2600-XDS-34-14-14

NOTE : Fuel injectors are NOT included and must be purchased elsewhere.